Easy Way Electronics, Inc. ›
Digital IDAS Mobiles › ICOM IC-F1721D VHF APCO P25 Digital Two Way Radio
ICOM IC-F1721D VHF APCO P25 Digital Two Way Radio – $CALL
Related tags: IC-F1721, ICF1721, Mobiles, P25 MOBILE, P25 Radios, VHF
This is our most popular choice for Fire, Police, County government agencies since it is the full P25 choice that is type accepted for the state.
For organizations who run an analog radio system and must migrate to a conventional P25 digital system, Icom provides one of the best solutions. The new F1721D series mobile allows you to program P25 digital and/or FM analog mode per channel. Flash ROM capability means future upgrades and flexible customization, tailored for your system.
Moreover, built-in multiple tone signaling capability and an optional voice scrambler satisfy existing analog FM system requirements. This new Icom’s range frequency coverage and rugged construction ensures a flexible, long life radio for you.
Icom is the smart choice for current – and future – public safety communication needs.
| General | |||
|---|---|---|---|
| Frequency rangeIC-F1721/D, F1821/D IC-F2721/D, F2821/D |
136–174MHz400–470MHz450–512MHz | ||
| Number of channels | 256 channels/ 32 zones | ||
| Channel spacing | 12.5/25kHz,15/30kHz | ||
| PLL channel step | 2.5kHz, 3.125kHz (VHF) 5kHz, 6.25kHz (UHF) |
||
| Antenna impedance | 50Ω | ||
| Operating Temp. range | –30°C to +60°C –22°F to +140°F |
||
| Power supply requirement | 13.6V DC nominal | ||
| Current drain (approx)TxRx |
|
||
| Dimensions (W×H×D)(projections not included) | 175×45×170 mm67⁄8 ×125⁄32 ×611⁄16 in | ||
| Weight (approx.) | 1.5kg; 3.3lb | ||
| Transmitter | |
|---|---|
| Output power (approx) | 50W (VHF)45W (UHF) |
| Max. frequency deviation | ±5.0/2.5kHz (Wide/Narrow) |
| Frequency error | ±2.0ppm |
| Spurious emissions | 75dB typ. |
| FM Hum and Noise | 45/40dB typ. (Wide/Narrow) |
| Adjacent channel power | 70/60dB min. (Wide/Narrow) |
| Audio harmonic distortion: | 3% typ. (40% deviation) |
| Modulation limiting | 70–100% of Max. deviation |
| Ext. microphone impedance | 600Ω (8-pin modular) |
| Receiver | |
|---|---|
| SensitivityAnalog (12dB SINAD)Digital (5% BER) | 0.25/0.3μV typ. (VHF/UHF)0.25/0.3μV typ. (VHF/UHF) |
| Squelch sensitivity | 0.25/0.3μV typ. (VHF/UHF)73dB typ. |
| Adjacent channel selectivityAnalogDigital | 80/75dB typ. (Wide/Narrow)73dB typ. |
| Spurious response | 80dB typ. |
| Intermodulation Analog Digital |
77/75dB typ. (Wide/Narrow) 77dB typ. |
| Hum and noise ratio | 50/45dB typ. (Wide/narrow) |
| Audio output power External audio (D-sub) |
4W typ. 22W typ.(at 10% distortion with an 8Ω load) |
| External speaker connector | 2-conductor 3.5 (d) mm (1⁄8″)/4Ω |
Applicable U.S. Military Specifications
| Standard | MIL 810 C | MIL 810 D | MIL 810 E | MIL 810 F | ||||
| Method | Proc | Method | Proc | Method | Proc | Method | Proc | |
| Low Pressure | 500.1 | I | 500.2 | I, II | 500.3 | I, II | 500.4 | I, II |
| High Temp. | 501.1 | I | 501.2 | I, II | 501.3 | I, II | 501.4 | I, II |
| Low Temp. | 502.1 | I | 502.2 | I, II | 502.3 | I, II | 502.4 | I, II |
| Temp. Shock | 503.1 | I | 503.2 | I | 503.3 | I | 503.4 | I |
| Solar Radiation | 505.1 | I | 505.2 | I | 505.3 | I | 505.4 | I |
| Rain | 506.1 | I, II | 506.2 | I, II | 506.3 | I, II | 506.4 | I, II |
| Humidity | 507.1 | I, II | 507.2 | II, III | 507.3 | II, III | 507.4 | – |
| Salt Fog | 509.1 | I | 509.2 | I | 509.3 | I | 509.4 | – |
| Dust Blowing | 510.1 | I | 510.2 | I | 510.3 | I | 510.4 | I |
| Vibration | 514.2 | VIII, X | 514.3 | I | 514.4 | I | 514.5 | I |
| Shock | 516.2 | I, II, V | 516.3 | I, IV | 516.4 | I, IV | 516.5 | I, IV |
Supplied Accessories
- Hand microphone, HM-148
- DC power cable
- Microphone hanger
- Mounting bracket kit
- External speaker, SP-22*
- Key assign stickers
